Chris-Craft Launch 22 Bedienungshandbuch PDF herunterladen (Seite 96)

3–34 Chris-Craft

Systems

Sanitizing the Fresh Water System

Sanitizing solution contains bleach. Do not drink. Tag all faucets to

notify that the system is being sanitized.

You should always sanitize the fresh water system under the following conditions:

• Before using it the first time.

• After winter storage.

• When the system has not been used for an extended period.

To sanitize the water system:

1. Ensure the water tank is empty before beginning this process.

2. You will need approximately one (1) gallon of weak bleach solution for each fifteen (15) gallons of tank water.

3. In an appropriate size bucket, make a solution bleach and water using ¼ cup of household, unscented bleach

per gallon of fresh water.

4. Dump water into water tank. Fill the remainder of the tank with fresh water.

5. Activate the water pump and allow air to bleed from the system. Ensure the sanitizing solution is in all parts of

the water system.

6. Allow treated water solution to remain in the system for three to four hours.

7. Drain treated water solution from lines and empty tank.

8. Flush entire system with fresh water, ensuring that all air bled from the system.

9. Empty the system completely, refill, and bleed of air. The system is now ready to use.

If fresh water has an excessive chlorine taste after sanitizing the system:

1. Pour a solution of 1 quart (0.95 liter) of vinegar and 5 gallons (19 liters) of fresh water into the water tank.

2. Allow the solution to stand for three days.

3. Drain the entire system and thoroughly flush with fresh water.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 301 302

Keine Kommentare

Chris-Craft Launch 22 Bedienungshandbuch Seite 96